Hi guys . Im going to Bornholm in april as every year.I have got a problem about wading shoe `s in winter or in early spring. Should I buy any neopren waders as usuall or made from other kind of material which are weight much less and how should I be clothed not to freeze in the sea. Ineed some advivice about this subject 😢
Sweet! We have a bit of that down this way too. And I can say it is good practice for saltwater redfish.
Gareth,
I'm sure we are going to have a lot of great fishing places when all fishermen understand that they don't have to "eat the ball" to succeed fishing.
Thanks,
Miguel,
I thought a lot about that, and finally I decide to write the word "libere" instead of "suelte" in the spanish version. I like it most because the whole action of releasing a fish speaks about an act of freedom: The fisherman is free to decide to let the fish live, and the fish is free again to live, feed and spawn. On the other hand, the logo is being part of some conservation campaigns on places where "catch and release" is absolutely unknown, like local communities near some rivers of the Amazon basin or some places at the pacific coast of South America, directed to people who are learning about that principle for the first time, and a sticker of the logo on a boat talking about freedom could make them forget that they are, in some way, "throwing their lunch to the water" (For some people of the third world, fishing is still a valid way to get all the protein they eat, no matter if they are killing the last fish of the river...)
Best,
[u:c48f94422e]The First Springer is Caught on the Blackwater Lodge beats[/u:c48f94422e]
Error, the image cannot be shown: http://www.ireland-salmon-fishing.net/Galleries/2010/gallery2010/march1…
Lodge regular Gavin Wishart from Newcastle, Co. Down came down to celebrate his 40th. birthday
this weekend & scooped the First Salmon of the 2010 season to be caught on the Lodge Fishery.
He was fishing on March 6th. with gillie Connie Corcoran on Ballinlovane and took the fish on Flying C at Cloonbeg.
The fish would have been released, but was bleeding from the gills so had to be kept.
The cast before he lost what they both believe was another springer, so there were definitely a few about.
It was hardly surprising that it took us until now to catch a fish as there were only 64 rod days
for the whole month of February. There would certainly be more springers caught if there were
more rods out on the river each day.
[u:c48f94422e]Prospects[/u:c48f94422e]
There are more fresh fish being seen in the river in the last few days.
The river is in absolutely cracking order at the moment - even for the fly.
0.44m on the gauge so perfect fly height & clarity a good 4 feet.
The weather forecast (Metcheck) looks dry for the next 2 weeks apart from about 6mm on the 15th.
Daily Updated Fishing Report: http://www.ireland-salmon-fishing.net/FishingReport/fishingreport.htm
Error, the image cannot be shown: http://www.ireland-salmon-fishing.net/FishingReport/gc10-3.jpg
I got this spinning block at the Fly tying celebration last week. I love it but I have too get used to not using so much dubbing at one time. If you do a lot of dubbing this is the tool to have...
I would like to get in touch with the photographer and subject in this image - To get their permission to use this image for a printed advert. Please contact me as soon as possible.
I found the adhesive backed lead in a walomart in the craft section
Christophe,
Thanks for your comment!
The inner tubing is generally available from tube material suppliers. Guideline has a large selection and many dealers all over Europe. There are even a few in France.
You can find them on Guideline's web site.
You can also try ordering online. Canadian Tube Fly Company has a very large selection of materials.
Martin
Hello,
This is really an outstanding exposé about tube flies.
Could you please tell me where we can get tube lining to attach cones on? I have problems finding some.
Many thanks
christophe
Hi just turned my first reel seat down. Now I need to know whats the best paint or cover for it.
Thanks for your help!
PS: This is a wonderfull web site and big help for beginners to start with rod building.
Are there any changes in leader design for women as opposed to men?
What I found I like is a 1/3 each mix of the following: rosin, bee's wax, and toliet seal wax (very cheap, $1.24 for a big block, found at any hardware store). To vary the softness, just add more toliet seal wax, as it is a lot softer than bees wax. You can make a wax that is plenty tacky, but is not so soft like Overton's, which I felt was too soft.
Eric,
If you go to the forum and try to register, you get this message. It contains very clear instructions including a link with my mail-address.
It basically says: Drop me an email at martin@globalflyfisher.com with the subject "GFF, register me" and I'll take care of it. It even has a link to take you directly to your email-program if you use one...
I have you in my queue and will register a few folks including you as soon as this has been submitted.
Martin
In your country is very many stone fly and i will try it on spring....Very realistic patern
i'm trying to register get registered on your site, have not been able to find address for "martin.
kindly advise
I have a "Joe King," a "Trout Rock #1," and one other.
Can you tell me what the value might be.
This is part of a collection from about the 1940"s
Any suggestions would be appreciated
William W. Anderson
Joseph,
I'm glad you like she story. I hope you get to have as much fun on you Cuba trip as I have had on my trips to Mexico and Belize.
Regarding tarpon leaders... I will not claim to be able to teach you to to tie one... they are different beasts!
I have a few lying around, and I might have tied some of them myself, but looking at them has me puzzled how I ever managed to do that! They consist of several sections held together by all sorts of intricate knots of which a couple of Bimini twists seem to be the simple part! And that basically says it. The idea is that you need very thick and strong mono attached to the fly, then you need a flexible and thin part as your so called class tippet (the breaking strength you are fishing with), which again attach to your leader attached to your fly line.
You want the fish to be unable to chew the lower part close to the fly, but able to break the next part, which is neither your leader nor your fly line.
I have sought on the web for a good instruction in tying one as well as run through my well stocked book shelves for a guide, but have found nada! The Bimini twist is easy to find and fairly easy to tie once you have tried it a couple of times, but tying the whole leader is a different issue.
I urge you to find a person who has done it and have him or her show you. Someone in a local club or shop must have the experience. In the meantime I'll try to dig out some instructions for the whole leader and make a properly illustrated article about the materials, process and proper usage. Hopefully before you leave...
Martin
Great pattern and good pics. Thanks! Keep in mind that these types of flies can really be hard on light tippets. They have a tendency to "helicopter" in the wind, twisting the tippet. Thanks again for posting cause I have been struggling to tie this pattern for awhile now!
Hello and thank you for sharing your fantastic trip. I will be leaving at the end of March 2010 with 2 friends to try to accomplish the same thing. We will be arriving Cancun and then flying to Cuba. Mostly chasing Tarpon in the mangroves. I appreciate your comments about Tarpon leaders and letting the hands of experience tie them but I am confused about their composition. eg, how long and what strength is the first section that attaches to the fly line, same for the next section and same for the tippet. I cannot find a pattern or sketch to follow on the net, and no fly shop I have talked to he in British Columbia seems able to help me. You are a great photographer and perhaps you could email me a photo or drawing of these leaders.
Again thanks for sharing,
Regards,
Joe
Peter is the master of alot of great flies! He actually catches BIG fish on them, which is even cooler!!
Rooster
Hi, I love this site and also this fly. I have one question though...why do you use a gold bead instead of a black one? The living larva's head is obviously black.
Thanks for sharing this pattern!
Hi Mike...I usually fish Hillhead and Hayling. Thanks for the info.
Cheers Dave
… I have a small favor to ask.
Support the Global FlyFisher through several different channels, including PayPal.
The Global FlyFisher has been online since the mid-90's and has been free to access for everybody since day one – and will stay free for as long as I run it.
But that doesn't mean that it's free to run.
It costs money to drive a large site like this.
See more details about what you can do to help in this blog post.
