Pictures

Evening at Sea Shore cottage

Johnnie concentrating

Loch Beannach

Outside cottage

Where Are We?

Seashore Cottage

Use a bigger fly!!

Step 1 - Insert one of the fly lines into a piece of shrink tube of approx. 6-8 cm (3 inches)

Step 2 - Heat the tips of the fly lines.

Step 3 - Remove the coating.

Step 4 - Now the fly lines are ready to be merged.

Step 5 - Sew the core from each fly line into the center of the coating of the other fly line.

Step 6 - (optional) Before pulling the lines tight together, apply a bit of glue.

Step 7 - Pull the fly lines tight together (before the glue dries out).

Step 8 - Cut of the additional cores.

Step 9 - Place the shrink tube over the merged position.

Step 10 - Apply heat to merge. The coating should merge to the extra core inside.

Step 11 - Remove the used shrink tube.

Step 12 - You have now merged 2 fly lines.

Step 0 - stick both line into the tube

Garfish

The Oscar

Oscar - the dubbing supplier

Sea trout

Since you got this far …

A money box

The GFF money box

… I have a small favor to ask.

Long story short

Support the Global FlyFisher through several different channels, including PayPal.

Long story longer

The Global FlyFisher has been online since the mid-90's and has been free to access for everybody since day one – and will stay free for as long as I run it.
But that doesn't mean that it's free to run.
It costs money to drive a large site like this.
See more details about what you can do to help in this blog post.