Thanks Martin for the calm, reasoned reply to this complaint. I just want to enjoy the wide array of content on GFF with my morning coffee, not put up with CRAP complaints. There is frost on the pumpkin here in Ontario, Canada this morning so my thoughts are turning to Steelhead fishing and tying flies. Keep up the good work for your truly Global audience.
Does anyone proofread this crap? After reading the first 2 sentences, I could not stand to read anymore of this garbage. Shame on the author and shame on Global Fly Fisher for posting this crap.
Richard,
These were shot with a DSLR, my Nikon D300s mounted with an old 55mm macro. I have experimented with both my phone, a compact camera and my SLR's, but since I want the best possible image quality, the SLR's are my favorites to used with the gadget. But as you can see in the review of the previous version, even phone pictures can come out nice.
Martin
Thank you for the review. What camera / phone did you use for the two flies shown above?
There is a huge hole in the ground behind the Salmon River Fish Hatchery in Altmar. After salmon are stripped of spawn and dispatched they are thrown in the hole and buried. The salmon carcasses cannot be transported because they are classified as toxic waste. Have fun, but don't take them home to eat.
Beach casters use a small cloth bag with a draw string as a weight. Fill it with sand. Use 2 to 6 lb test tippet to attach it to leader. When it reaches depth, a sharp strip can break it off. This is not cast, just feed it over off the boat. I use a coated lead core 30 ft head, heavy flies, and a non-stretch running line. The bags are cheap,sand is free, and it is non-polluting.
Hi,
Could you give me the reason for using hot spots and if using holographic, for example mylar tinsel on fly model on the back of the body, or other flash materials. Does increase the number of strikes? On the other hand, does this work on all species of trout or is it only suitable for rainbow trout? Could you provide me some published article about this subject?
Thank you.
I have and love this little book by my friend Geert. He is a special person and his flies show that on all levels. Great stuff and his work inspires one to remember tying is supposed to be fun!!
Sal,
I have tried to get a hold of one myself, but failed. It's made by US tyer Joe Libeu, but I haven't had success in ordering one. I will follow up on it.
Martin
Japanese Nymph Legs is a product very similar to the synthetic bristles from a broom that the Author uses. They are very similiar in size but are made of a slightly different material that makes shaping them a bit easier. I use an adjustable heat soldering tool and have through trial and error figured out the best temperature for melting the bends in the legs without melting through the material. The JNLs are available at retail from a few shops, mostly those that have a section for realistic fly tying.
Porpoises are impossible to avoid, and released sea trout released in their presence suffer a 100% mortality rate. I have quite a few old, rusty fly hooks [NOT stainless steel]. in size 12 or smaller. Before I release a trout I pin one of these small, rusty hooks (no line attached) lightly in the corner of the trout's mouth. Porpoises have a very sensitive sonar system. I have watched them veer away from sea trout with a hook in its mouth.
Enjoyed reading your article on Susquehanna small mouth flies, I lived in Pa. most of my life and small mouths were my favoite spiecies to fish for , first with spinning gear and then with the fly rod , I would visit clousers fly shop in the winter to get next seasons fishing license, and just talk with Bob and his wife Joan, and sometims Bobby jr. if he was there , floated the Susquehanna with my buddy at the Fabridam in Sunbury Pa. the PP+L dam just outside of Sunbury, catching smallies all summer and an occasional Walleye and in October the Walleyes would turn on , also a gem of mine Mahantango creek on Northumberland side near its confluence with the Susquehanna , and my go to fly was a bass Clouser minnow, in size 4 , lost and landed many a nice smallmouth with my personal best being 18 1/2", I ve since move to North Carolina and ive put the rod up for now, closest bass water for smallies is 2 hr drive one way now , good luck with future articles ,great job
As always, check with a reliable source about local conditions before you finalize your plans and pay your money. Freshwater lakes, rivers, and lagoons in Florida have been increasingly plagued by toxic algae blooms and widespread fish kills. Southwest Florida has not escaped the pollution expanding through Florida waters.
Fish species with the largest eyes in relation to their body mass are most likely to feed at night.
Martin your series of tying tips with Wayne is a perfect addition to all the recipe vids. Each one of these clips is specific and useful. Wayne is of course such an outstanding talent. Thanks for making them available.
Cheers, Ken
Hats Off To You Guys For Doing A Great Job,I'me From Newfoundland , Canada, I Loved All Off The Video, Again Great Job And Keep Up The Good Work.
You can solve this issue easily by using two full-sinking fly lines, connected end-to-end. To prevent tangling, you will want to have the boat drifting or moving slightly after the first line is casted and paid out, then when you have the line straightened out, you feed out the second line, sinking portion first, then running line. Both lines will hang down in the water, if they are each 100ft lines, and there is no current, the fly will get to 200ft depth, eventually. More likely, there is some current, and the extra line will allow you to control how deep the fly gets and the angle of presentation. Secondarily, the running line sinks slower and responds to current more than the sinking sections - this may pose a risk of tangles if you pay out too much line all at once, but it also provides for a unique motion to the fly, because the fly will follow the pattern of the line though the water if the line is slack and not straightened out - it will follow a curve, or even an s-curve, if that is the shape of the line in the water. There is no water too deep to fish with a fly line, unless there is wind and current. In high winds and current, you may find that a double sinking line of 200ft length only gets the fly 30-40ft down on a fast drift. A double line set-up also allows for normal casting, as the second line acts as backing when not in use. Using gel-spun backing under the second line is advisable as it uses up less space on the reel. This type of set-up can be used in any line weight for any deep water fish.
This is a great option to the Nikon/Canon light rings which are quite expensive. Probably if is fixed in a soft box ( simple made of cardboard with white paper ) will provide very good photos.
I've done this for years and it's a lot of fun to convert flies from one usage to another. One of my favorite sources of inspiration was the book "Fly Patterns of Alaska" , a compilation of the Alaska Fly Fishers from Amato Publications. Many of those salmon ad saltwater patterns can be tweaked into wonderful, down-sized largemouth bass streamer patterns for Pennsylvania lakes.
Jill,
I have no problems seeing the video, and it plays as it should on my computer as well as on my phone. You can try the source on Vimeo as an alternative: https://vimeo.com/188550829
I have also mailed you.
Martin
My father found this video and is trying to share it with me. My grandfather Lewis Lionvale is in the video. I am unable to view it. Lewis was President of the Club twice. I would love to see him. Is it possible for you to send me the video? Thank you,
Jill Lionvale Vink
mobile: 805/459-1093
… I have a small favor to ask.
Support the Global FlyFisher through several different channels, including PayPal.
The Global FlyFisher has been online since the mid-90's and has been free to access for everybody since day one – and will stay free for as long as I run it.
But that doesn't mean that it's free to run.
It costs money to drive a large site like this.
See more details about what you can do to help in this blog post.
