Synthetic Glass Minnow
Related content
Glass minnows are a light weight and easy to cast fly. They are also very easy to tie. Great flies for mimicking small fry, or see through fish like glass minnows. You will love fishing this fly, and also love tying them. Great for inshore saltwater species like redfish or sea trout, and also great for fresh water fish like bass and large trout.
Materials used:
Fibers:
Super Fiber or EP Fiber - Natural White
Hook: Gamakatsu SC15 in size 1/0
Epoxy:
Solarez "thin hard"
Eyes: Silver 5MM eyes
Body wrap:
Cactus Chinelle - white/clear
Read more about why you should register.
The Global FlyFisher does NOT make any money from these links or purchases!
You can support the Global FlyFisher directly here, if you feel like it.
Related content
More content from the front page
Since you got this far …
The GFF money box
… I have a small favor to ask.
Long story short
Support the Global FlyFisher through several different channels, including PayPal.
Long story longer
The Global FlyFisher has been online since the mid-90's and has been free to access for everybody since day one – and will stay free for as long as I run it.
But that doesn't mean that it's free to run.
It costs money to drive a large site like this.
See more details about what you can do to help in this blog post.
Comments
Can you guys help me improve
Can you guys help me improve this? It fouls on the hook sometimes, any way you can think of keeping this from happening? I was thinking of epoxying up the material a bit, but what I love about this fly is the movement in the water, I'm afraid that will be hindered.
Shawn McQuade
Glass minnow anti-foul
One thing that you might try that I have only read about (haven't actually done it myself yet) is to make about 6-7 thread wraps around the base of the wing, almost as you would for a parachute poste. Only you do not have to go up the post, only around the base. This ought to be enough to keep it from sagging onto the hook. You can always stiffen it up a bit with a drop of superglue at the base-just a little. Try it both ways and let us know what works best. If the base of the wing is too wide to wrap it all, try just wrapping the most posterior part. You may have to experiment a bit.
Thanks PJ. I will try that.
Thanks PJ. I will try that. Probably the later (as like you said there is too much thickness at the base) Maybe super glue will be better than epoxy, in fact I think it will be. Thanks!
Shawn McQuade
LCR or a guard
Shawn,
I think the you will either have to add some epoxy or LCR http://globalflyfisher.com/tie-better/light-curing-resins to the base of the wing and maybe a bit along the back, not totally disabling it from moving, but keeping it from totally wrapping around the hook. I have had this exact problem in some pike streamers that I tied, which ended up as a mess, wrapped around the hook.
Another option might be a monofilament guard - a simple horizontal, drop shaped loop in the rear of the hook, sticking out far and wide enough to keep the wing from fouling. Tie it in before the body and make it maybe a third of the wing length.
Martin
Sorry, I'm not familiar with
Sorry, I'm not familiar with LCR, what is that?
Shawn McQuade
Ok I know what LCR is now...
Ok I know what LCR is now... Light curing resin... Basically uv epoxy. Ok yeah, sorry...
Shawn McQuade
More info here
Shawn,
I added this link to the comment. Lots of info on LCR there: http://globalflyfisher.com/tie-better/light-curing-resins
Martin
Martin, thank you. However I
Martin, thank you. However I was only unfamiliar with the term LCR Not the actual materials. I use uv curing resin all the time. In fact most of the videos posted from me (including this one) are using some sort of resin. I use solarez mainly because of the price.
Shawn McQuade